Non-Slip Heat Shrink Tubing Sleeve For Rod Wrap

Product Detail

Non-Slip Heat Shrink Tubing Sleeve For Rod Wrap


Technical Parameters

Product Type	Heat shrink tube
Material	PE
Flame retardant	VW-1
Operation Temperature	-40?-125?
Withstand Voltage	600V
Shrink ratio	2:1
Water absorption	<0.2%
Shrinking temperature	75-125?
Usage	Low Voltage,Sport equipment, fishing tool etc
Place of Origin	Guangdong, China (Mainland)




Introduction:

It is made from co-extrusion of polyvinyl and hot-melt adhesive, suitable for various electric insulation and bonding of cables and connectors, widely applied for connecting or end-handling, electric wire, corrosion-proof of metallic rods or tubes and antenna protection. 




Feature:

1. Shrinks to 2:1,abrasion resistant

2. Fast, safe, secure way to wrap wiring harnesses, different lengths ,colors and diameters available




Advantages

1.Eco-friendly.soft, skidproof, beautiful;

2.Shrinking fast 




Detailed Images



Non-Slip Heat Shrink Tube Specification Table
Standard Specific	Inner diameter before shrink(mm)		Inner diameter after shrink(mm)		Standard Package (meter/piece)
	Inner diameter	Average thickness	Maximum inner diameter	Average thickness
F15mm	=15	0.45±0.15	8	0.85±0.15	1m/pcs   1.6m/pcs
F20mm	=20	0.50±0.15	11	0.90±0.15	1m/pcs   1.6m/pcs
F22mm	=22	0.50±0.15	12.5	0.90±0.15	1m/pcs   1.6m/pcs
F25mm	=25	0.50±0.15	14.5	1.00±0.15	1m/pcs   1.6m/pcs
F28mm	=28	0.50±0.15	15.5	1.00±0.15	1m/pcs   1.6m/pcs
F30mm	=30	0.60±0.15	17.5	1.20±0.15	1m/pcs   1.6m/pcs
F35mm	=35	0.60±0.15	20	1.20±0.15	1m/pcs   1.6m/pcs
F40mm	=40	0.60±0.15	23	1.20±0.15	1m/pcs   1.6m/pcs
F45mm	=45	0.65±0.15	25	1.25±0.15	1m/pcs   1.6m/pcs
F50mm	=50	0.65±0.15	28	1.25±0.15	1m/pcs   1.6m/pcs

If you need customized / special sizes, please click here to send an inquire to us. We will respond you in 24 hours.





Company Information (Click Here)